ATTENZIONE PRIMA DI CONTATTARE UN UTENTE LEGGERE ATTENTAMENTE :
- Guida alla sicurezza! Attenti alle truffe!
- Condizioni generali del sito
Non farti ingannare! Se è troppo bello per essere vero, spesso si tratta di una truffa!
BarattoMusicale.com NON è responsabile degli annunci, che vengono inseriti in piena responsabilità ed autonomia dagli utenti, e che sono gli unici da contattare per le trattative. BarattoMusicale.com NON percepisce nessuna provvigione sul venduto!
|
Perfetti, con manuale ITA
2 in/4 uit digitale speaker processor
DX 24 Plus is an extremely versatile digital processor for loudspeaker systems based on the Generalmusic custom DSP RED 208. This powerful 40 bit resolution DSP, together with low-noise 24 bit converters, provides an extremely high processing quality and a dynamics suitable for the most professional applications. DX 4 Plus has inputs and 4 independent outputs and can be configured as 2-way stereo, 3- and 4-way mono or as distribution mixer with up to 4 outputs. Configurations that allows the 2 input signals to be summed and routed to different outputs are also available.
Each of the 2 inputs features:
Master Delay, available also on the input sum
Digital Noise Gate
5-band parametric EQ
Level control
Each of the 4 outputs features:
Delay line
5-band parametric EQ
Crossover HP and LP filters which can be selected from the Bessel, Butterworth and Linkwitz-Riley types with slopes up to 48dB
Phase control with 5° steps through a full 360°
Digital Compressor/Limiter
Level and Mute control
DX 24 Plus include 7 Factory presets, each of which can be used as a basic configuration for preparing custom presets, others already optimized for LEM loudspeaker systems; also, 64 User presets can be freely programmed to store all the system settings with any of the Input/Output configurations available.
All operations are carried out via user interface that includes a 2x16 LCD, a convenient dial for the parameter modification, selector buttons for the direct access to all the features and 4 LED VU-meters that provide a detailed visualization of each input or output signal. DX 24 Plus is also equipped with types of serial interface (RS232 and RS485) for the remote control thru a PC and for the linking of more units.
Input section:
Connections 2 x Combo
Nominal input sensitivity 0dB (0.775 V)
Input impedance 30 kohms, electronically balanced
Maximum input level +20dBu
Input Gain -30 / +6dB variable in 0.5dB steps
Output section
Connections 4 x XLR-M
Output impedance 600 ohms, electronically balanced
Nominal output level 0dBu
Maximum output level +20dBu
Output Gain -30 / +6dB variable in 0.5dB steps
DSP section
A/D converters 20bit
D/A converters 24bit
Internal dynamics 40bit
Sampling frequency 48kHz
Features
Configuration 2-way stereo, 2/3/4-way mono
Crossover Filters Type Bessel, Butterworth or Linkwitz-Riley
Crossover Filters Slope 6, 12, 18, 24, or 48dB per octave
Delay Step 21 microseconds minimum
Max Delay time 2621 ms (inputs), 291 ms (outputs)
EQ filters Up to 40 maximum (depending on the crossover slope)
EQ Type Peak, 6dB lo-shelf, 12dB lo-shelf, 6dB hi-shelf, 12dB lo-shelf, notch
EQ Gain ±15dB, variable in 0.5dB steps
EQ Bandwidth 0.05 to 3.00 octaves, variable in 0.05 steps
EQ freq 15.6Hz to 16kHz
Dynamics Compressor/Limiter on all the outputs - Noise Gate on all the inputs
Memories 17 factory presets + 64 user presets
General performance (with filters out)
Frequency response 20Hz - 20kHz (±0,25dB)
Communications 9-pin RS232, XLR-F RS485 In, XLR-F RS485 In
Dynamic range Higher then 117dB, 20 Hz to 20 kHz
Channel separation Higher then 100dB, 20Hz to 20kHz
Distortion (THD) 0,05%, 20Hz to 20kHz
Input Metering -24dB, -18dB, -12dB, -6dB, CLIP relative to clip point (+20dBu)
Output Metering -24dB, -12dB, -6dB, LIMIT relative to limiter threshold setting, CLIP
General specifications
Dimensions: (W x H x D) 483 x 44 x 300 mm /19'' x 1,7'' x 11,8''
Weight 4 kg / 8,8 lbs
|
NO contatti per fini promozionali.
66 visite
|
